FEATURES
•  Vandal Resistant Weatherproof Keypad with Back-lit Metal Key Buttons
•  12-24V AC/DC Wide Operation Voltage Range
•  Dual Relay Output Full Feature Digital Keypad for Door Lock and Equipment Control
•  Single-User Mode or Multi-User Mode Operation Selectable
•  Compatible with Fail-safe or Fail-secure Electric Door Lock
•  5A / 24VDC Rating Form C Relay for Door Lock Drive
•  Operates in Stand Alone Electric Door Lock or Dual Door Inter-lock System
•  Door Auto Re-lock or Timing Re-lock After Entry
•  Door Forced Open Warning and Door Propped-up Warning
•  100 User Codes for Door Lock Control (Output 1) and 10 User Codes for Output 2
•  Multi-task Super User Code for Inhibiting (Refuse Access with User Codes), Overriding Door Lock (Keep Door Open); and ...Operating The Two Outputs under Any Condition
•  Duress Code for Door Opening and Reporting The Event of The Owner Opened The Door under Duress
•  10 Visitor Codes for Temporary Workers or Visitors, Which Expire after Use or Programmable Times of 1-99 Hours
•  Three Options of Keypad System Lock-up after Successive False Code Entry
•  The Two Outputs Are Configurable to Operate for 1-999 Seconds Timing Mode, Start / Stop Mode or Start / Stop Mode with 2 or 3 Digits Accelerated Code.
•  Door Open Announcer Is Programmable for 1 Long Beep, 2 Short Beeps or No Notification
•  Auto or Manual User Code Entry Mode for User Convenience or Security Enhancement
•  Pacifier Tone And Door Open Announcer Can Be OFF for Silent Environment
•  Standby Flashing LED Indicator Can Be OFF for People Do Not Like Flashing LED at Night
•  Four Egress Delay and Warning Options for User Convenience or Security Enhancement
•  Key Button Active Signal Output for Triggering Optional Equipment
•  Built-in Tamper Switch with N.C. Dry Contact
• Standard Version (DK-9380) and Door Bell Button Version (DK-9380B -- Uses Output 2 as Bell Actuation Contact) Available
•  Up-graded Replacement Version of The Popular Vandal Resistant Keypad DK-2880
•  Steel Box for Surface Mount on Wall or Mounting on Gooseneck Post. Flush Mount Version Is Supplied with Flush Mount Plastic Back Box

SPECIFICATIONS
•  Operation Voltage:
   12-24V AC/DC, full voltage range

•  Operation Current:
        Quiescent - 16mA
   Maximum - 78mA (Relays operating)

•  Operation Modes:
   a) Multi User Mode  -- 100 user codes for output 1 (user number 00-99), Auto or Manual Code Entry
   -- 10 user codes for output 2 (user number 0-9), Auto or Manual Code Entry
   b) Single User Mode -- 1 user code for each output and the special functions, Auto or Manual Code Entry

•  User Code Combinations:
   a) Single User Mode -- 10,000 (User Code fixed at 4 digits)
   b) Multi User Mode -- 110,000,000 (User Code 4-8 digits programmable)

•  Input Sensing Terminals:
   a) Egress Input -- Normally open referring to (–) ground
   b) Door Position Sensor Input -- Normally closed referring to (–) ground
   c) Output 1 Stop Control -- Normally open referring to (–) ground

•  Output Contacts:
   OUTPUT 1 : Normally Closed and Normally Open Dry Contacts, 5A / 24VDC Max. Rating
   OUTPUT 2 : Normally Closed and Normally Open Dry Contacts, 1A / 24VDC Max. Rating

•  Tamper Switch Contact:
   Normally Closed Dry Contact, 50mA / 24VDC Max.

•  Duress, Inter-lock & Key Active Output Rating:
   NPN Open Collector switches to ground when active, 24VDC / 100mA Sink

•  Auto Refreshing Time During Code Entry:
   a) Eash Digit Maximum Entry Time Limit -- 10 seconds
   b) Eash Code Maximum Entry Time Limit -- 30 seconds

•  Weatherproof: IP-66

•  Operation Temperature:
   -20°C to +70°C

•  Ambient Humidity:
   5-95% relative humidity (non-condensing)

•  Dimensions:
   Surface Mount Version --- 156(H) X 103(W) X 50/70(D)mm

•  Weight:
   Surface Mount Version --- 980g net

•  Housing:
   Surface Mount Version --- Anodized steel, Powder paint coating, 1.5mm Stainless steel faceplate

Specifications are subject to change for modification without notice