INTRODUCTION DK-9350 is a dual relay output, vandal resistant weatherproof keypad. It employs durable back-lit metal button keyboard and rugged metal housing ideally for high traffic and harsh environment applications. The Output 1 is a Form C relay with 5 Amp contact rating mainly designed for electric door lock actuation. The Output 2 is a Form C relay with 1 Amp rating. In the “Standard” version, the Output 2 is prepared for auxiliary equipment control while in the “Bell Button” version (DK-9350B) is for actuating optional electronic door chime. The die-cast metal box of the DK-9350 is suitable for surface mount on wall or on gooseneck pedestal mounting post. Remark: DK-9350 is the up-graded software replacement version of the popular old keypad DK-2850. It is directly terminal to terminal compatible in installation. FEATURES • Vandal Resistant Weatherproof Keypad with Back-lit Metal Key Buttons • 12-24V AC/DC Wide Operation Voltage Range • Dual Relay Output Full Feature Digital Keypad for Door Lock and Equipment Control • Single-User Mode or Multi-User Mode Operation Selectable • Compatible with Fail-safe or Fail-secure Electric Door Lock • 5A / 24VDC Rating Form C Relay for Door Lock Drive • Operates in Stand Alone Electric Door Lock or Dual Door Inter-lock System • Door Auto Re-lock or Timing Re-lock After Entry • Door Forced Open Warning and Door Propped-up Warning • 100 User Codes for Door Lock Control (Output 1) and 10 User Codes for Output 2 • Multi-task Super User Code for Inhibiting (Refuse Access with User Codes), Overriding Door Lock (Keep Door Open); and Operating The Two Outputs under Any Condition • Duress Code for Door Opening and Reporting The Event of The Owner Opened The Door under Duress • 10 Visitor Codes for Temporary Workers or Visitors, Which Expire after Use or Programmable Times of 1-99 Hours • Three Options of Keypad System Lock-up after Successive False Code Entry • The Two Outputs Are Configurable to Operate for 1-999 Seconds Timing Mode, Start / Stop Mode or Start / Stop Mode with 2 or 3 Digits Accelerated Code. • Door Open Announcer Is Programmable for 1 Long Beep, 2 Short Beeps or No Notification • Auto or Manual User Code Entry Mode for User Convenience or Security Enhancement • Pacifier Tone And Door Open Announcer Can Be OFF for Silent Environment • Standby Flashing LED Indicator Can Be OFF for People Do Not Like Flashing LED at Night • Four Egress Delay and Warning Options for User Convenience or Security Enhancement • Key Button Active Signal Output for Triggering Optional Equipment • Built-in Tamper Switch with N.C. Dry Contact • Standard Version (DK-9350A) and Door Bell Button Version (DK-9350B -- Uses Output 2 as Bell Actuation Contact) • Up-graded Replacement Version of The Popular Vandal Resistant Keypad DK-2850 • Die-cast Aluminum Box for Surface Mount on Wall or Mounting on Gooseneck Post SPECIFICATIONS • Operation Voltage: 12-24V AC/DC, full voltage range • Operation Current: Quiescent - 16mA Maximum - 78mA (Relays operating) • Operation Modes: a) Multi User Mode -- 100 user codes for output 1 (user number 00-99), Auto or Manual Code Entry -- 10 user codes for output 2 (user number 0-9), Auto or Manual Code Entry b) Single User Mode -- 1 user code for each output and the special functions, Auto or Manual Code Entry • User Code Combinations: a) Single User Mode -- 10,000 (User Code fixed at 4 digits) b) Multi User Mode -- 110,000,000 (User Code 4-8 digits programmable) • Input Sensing Terminals: a) Egress Input -- Normally open referring to (–) ground b) Door Position Sensor Input -- Normally closed referring to (–) ground c) Output 1 Stop Control -- Normally open referring to (–) ground • Output Contacts: OUTPUT 1 : Normally Closed and Normally Open Dry Contacts, 5A / 24VDC Max. Rating OUTPUT 2 : Normally Closed and Normally Open Dry Contacts, 1A / 24VDC Max. Rating • Tamper Switch Contact: Normally Closed Dry Contact, 50mA / 24VDC Max. • Duress, Inter-lock & Key Active Output Rating: NPN Open Collector switches to ground when active, 24VDC / 100mA Sink • Auto Refreshing Time During Code Entry: a) Eash Digit Maximum Entry Time Limit -- 10 seconds b) Eash Code Maximum Entry Time Limit -- 30 seconds • Weatherproof: IP-66 • Operation Temperature: -20°C to +70°C • Ambient Humidity: 5-95% relative humidity (non-condensing) • Dimensions: 125(H) X 79(W) X 46/54(D)mm • Weight: 530g net • Housing: Cast Aluminum, Powder paint coating, 1.5mm Stainless steel faceplate Specifications are subject to change for modification without notice
|