FEATURES
•  Single Output Full Feature Digital Keypad for Door Lock Control
•  Single-User Mode or Multi-User Mode Operation Selectable
•  Compatible with Fail-safe or Fail-secure Electric Door Lock
•  3A / 12VDC Rating Solid State Door Lock Driver for Long Service Life
•  Built-in Door Bell Button with 50mA/24V Rating N.O. Dry Contact
•  Operates in Stand Alone Electric Door Lock or Dual Door Inter-lock System
•  Door Auto Re-lock or Timing Re-lock After Entry
•  Door Forced Open Warning and Door Propped-up Warning
•  100 User Codes for Door Lock Control
•  Multi-task Super User Code for Inhibiting (Refuse Access with User Codes), Overriding Door Lock (Keep Door Open); and Operating The Door Lock under Any Condition
•  Duress Code for Door Opening and Reporting The Event of The Owner Opened The Door under Duress
•  10 Visitor Codes for Temporary Workers or Visitors, Which Expire after Use or Programmable Times of 1-99 Hours
•  Three Options of Keypad System Lock-up after Successive False Code Entry
•  The Door Lock Control Output Is Configurable to Operate for 1-999 Seconds Timing Mode, Start / Stop Mode or Start / Stop Mode with 2 or 3 Digits Accelerated Code.
•  Door Open Announcer Is Programmable for 1 Long Beep, 2 Short Beeps or No Notification
•  Auto or Manual User Code Entry Mode for User Convenience or Security Enhancement
•  Pacifier Tone And Door Open Announcer Can Be OFF for Silent Environment
•  Standby Flashing LED Indicator Can Be OFF for People Do Not Like Flashing LED at Night
•  Four Egress Delay and Warning Options for User Convenience or Security Enhancement
•  Key Button Active Signal Output for Triggering Optional Equipment
•  Built-in Tamper Switch with N.C. Dry Contact
•  Indoor User Only. Surface Mount Plastic Housing

SPECIFICATIONS
•  Operation Voltage:
    12V DC, 11-15V DC

•  Operation Current:
   Quiescent - 16mA
   Maximum - 78mA (Relays operating)

•  Operation Modes:
   a) Multi User Mode  -- 100 user codes for output 1 (user number 00-99), Auto or Manual Code Entry
   b) Single User Mode    -- 1 user code for each output and the special functions, Auto or Manual Code Entry

•  User Code Combinations:
   a) Single User Mode -- 10,000 (User Code fixed at 4 digits)
   b) Multi User Mode -- Over 1 Million (User Code 4-8 digits programmable)

•  Input Sensing Terminals:
   a) Egress Input -- Normally open referring to (–) ground
   b) Door Position Sensor Input -- Normally closed referring to (–) ground
   c) Output 1 Stop Control -- Normally open referring to (–) ground

•  Output Contacts:
   OUTPUT 1 : Solid State Fail Secure or Fail-safe, 3A / 12VDC. Rating
   DOOR BELL : 50mA / 24VDC Max. Rating, Tact Switch Normally Open Dry Contact

•  Tamper Switch Contact:
   Normally Closed Dry Contact, 50mA / 24VDC Max.

•  Duress, Inter-lock & Key Active Output Rating:
   NPN Open Collector switches to ground when active, 24VDC / 100mA Sink

•  Auto Refreshing Time During Code Entry:
   a) Eash Digit Maximum Entry Time Limit -- 10 seconds
   b) Eash Code Maximum Entry Time Limit -- 30 seconds

•  Operating Environment:
   In-door use only

•  Operation Temperature:
   -20°C to +70°C

•  Ambient Humidity:
   5-95% relative humidity (non-condensing)

•  Dimensions:
   117(H) X 117(W) X 21(D)mm

•  Weight:
   180g net

Specifications are subject to change for modification without notice