FEATURES • Three Output Full Feature Digital Keypad for Door Lock and Equipment Control • Single-User Mode or Multi-User Mode Operation Selectable • Compatible with Fail-safe or Fail-secure Electric Door Lock • 3A / 12VDC Rating Solid State Door Lock Driver for Long Service Life • Operates in Stand Alone Electric Door Lock or Dual Door Inter-lock System • Door Auto Re-lock or Timing Re-lock After Entry • Door Forced Open Warning and Door Propped-up Warning • Built-in Door Bell Button with 1A Relay Output N.O. Dry Contact • 100 User Codes for Door Lock Control, 10 Each User Codes for Output 2 and Output 3 • Multi-task Super User Code for Inhibiting (Refuse Access with User Codes), Overriding Door Lock (Keep Door Open); and Operating The Three Outputs under Any Condition • Duress Code for Door Opening and Reporting The Event of The Owner Opened The Door under Duress • 10 Visitor Codes for Temporary Workers or Visitors, Which Expire after Use or Programmable Times of 1-99 Hours • Three Options of Keypad System Lock-up after Successive False Code Entry • All Three Outputs Are Configurable to Operate for 1-999 Seconds Timing Mode, Start / Stop Mode or Start / Stop Mode with 2 or 3 Digits Accelerated Code. • Door Open Announcer Is Programmable for 1 Long Beep, 2 Short Beeps or No Notification • Auto or Manual User Code Entry Mode for User Convenience or Security Enhancement • Pacifier Tone And Door Open Announcer Can Be OFF for Silent Environment • Standby Flashing LED Indicator Can Be OFF for People Do Not Like Flashing LED at Night • Four Egress Delay and Warning Options for User Convenience or Security Enhancement • Key Button Active or Alarm Active Signal Output for Triggering Optional Equipment • Built-in Tamper Switch with N.C. Dry Contact • Weatherproof Surface Mount Plastic Housing SPECIFICATIONS ● Operation Voltage: 12V DC, 11-15V DC ● Operation Current: Quiescent - 16mA Maximum - 78mA (Relays operating) ● Operation Modes: a) Multi User Mode -- 100 user codes for output 1 (user number 00-99), Auto or Manual Code Entry -- 10 user codes for output 2 (user number 0-9), Auto or Manual Code Entry -- 10 user codes for output 3 (user number 0-9), Auto or Manual Code Entry b) Single User Mode -- 1 user code for each output and the special functions, Auto or Manual Code Entry ● User Code Combinations: a) Single User Mode -- 10,000 (User Code fixed at 4 digits) b) Multi User Mode -- 111,110,000 (User Code 4-8 digits programmable) ● Input Sensing Terminals: a) Egress Input -- Normally open referring to (–) ground b) Door Position Sensor Input -- Normally closed referring to (–) ground c) Output 1 Stop Control -- Normally open referring to (–) ground ● Output Contacts: OUTPUT 1 : Solid State Fail Secure or Fail-safe, 3A / 12VDC. Rating OUTPUT 2 : Normally Closed and Normally Open Dry Contacts, 1A / 24VDC Max. Rating DOOR BELL : 1A / 24VDC Max. Rating ● Tamper Switch Contact: Normally Closed Dry Contact, 50mA / 24VDC Max. ● OUTPUT 3, Duress, Inter-lock & Key Active Output Rating: NPN Open Collector switches to ground when active, 24VDC / 100mA Sink ● Auto Refreshing Time During Code Entry: a) Eash Digit Maximum Entry Time Limit -- 10 seconds b) Eash Code Maximum Entry Time Limit -- 30 seconds ● Weatherproof: IP-54 ● Operation Temperature: -20°C to +70°C ● Ambient Humidity: 5-95% relative humidity (non-condensing) ● Dimensions: 117(H) X 117(W) X 28(D)mm ● Weight: 230g net Specifications are subject to change for modification without notice
|