FEATURES • Single Output Digital Keypad for Door Lock Control • Single-User Mode or Multi-User Mode Operation Selectable • Compatible with Fail-safe or Fail-secure Electric Door Lock • 3A / 12VDC Rating Solid State Door Lock Driver for Long Service Life • 100 User Codes for Door Lock Control • Multi-task Super User Code for Inhibiting (Refuse Access with User Codes), Overriding Door Lock (Keep Door Open); and Operating The Door Lock under Any Condition • 10 Visitor Codes for Temporary Workers or Visitors, Which Expire after Use or Programmable Times of 1-99 Hours • Two Options of Keypad System Lock-up after Successive False Code Entry • The Door Lock Control Output Is Configurable to Operate for 1-999 Seconds Timing Mode, Start / Stop Mode or Start / Stop Mode with 2 or 3 Digits Accelerated Code. • Door Open Announcer Is Programmable for 1 Long Beep, 2 Short Beeps or No Notification • Auto or Manual User Code Entry Mode for User Convenience or Security Enhancement • Pacifier Tone And Door Open Announcer Can Be OFF for Silent Environment • Standby Flashing LED Indicator Can Be OFF for People Do Not Like Flashing LED at Night • Four Egress Delay and Warning Options for User Convenience or Security Enhancement • Built-in Tamper Switch with N.C. Dry Contact • Indoor User Only. Flush Mount on U.S. Electric Gang Box or Surface Mount on The Supplied Plastic Box SPECIFICATIONS • Operation Voltage: 12V DC, 11-15V DC • Operation Current: Quiescent - 16mA Maximum - 50mA • Operation Modes: a) Multi User Mode -- 100 user codes for output 1 (user number 00-99), Auto or Manual Code Entry b) Single User Mode -- 1 user code for each output and the special functions, Auto or Manual Code Entry • User Code Combinations: a) Single User Mode -- 10,000 (User Code fixed at 4 digits) b) Multi User Mode -- Over 1 Million (User Code 4-8 digits programmable) • Input Sensing Terminals: Egress Input -- Normally open referring to (–) ground • Output Contacts: OUTPUT 1 : Solid State Fail-secure or Fail-safe, 3A / 12VDC. Rating • Tamper Switch Contact: Normally Closed Dry Contact, 50mA / 24VDC Max. • Auto Refreshing Time During Code Entry: a) Eash Digit Maximum Entry Time Limit -- 10 seconds b) Eash Code Maximum Entry Time Limit -- 30 seconds • Operating Environment: In-door use only • Operation Temperature: -20°C to +70°C • Ambient Humidity: 5-95% relative humidity (non-condensing) • Dimensions: 117(H) X 72(W) X 42(D)mm • Weight: 160g net Specifications are subject to change for modification without notice
|