FEATURES • Fully Compatible with All The Keypads of DK-2800 MK-II Series for Split-decoded Operation • Full Feature Signal Decoding for Tri-Tech Operation • Simple Three Wire Connection for Split-decoded Data Communication; (+), (-) & Data I/O • Compatible with All The Keypads of 12VDC and 12-24VDC Operations • Three Form C Relays with N.C. and N.O. Dry Contacts • All Relay Outputs Are Configurable with Auto Reset Timer Mode or Start / Stop Mode. • Compatible with Fail-safe or Fail-secure Electric Door Lock • Built-in Door Chime • Built-in Siren for Tamper, Door Forced Open & Door Propped-up • Current Limited Power Source (750mA Max.) for Server Keypad • Accepts Auxiliary Keypads And Readers for Multi-station Operations • Built-in Control Logic Circuit for High Security Dual Door Inter-lock System • Built-in Real-Time-Clock Controls The Start and Stop Times in Daily Operation • Timing Re-lock or Auto Re-lock for The Door After Entry Prevents “Tail-gate” Follower • Maximum 1,000 Users for Controlling Output 1 and 100 Users Each for Outputs 2 and 3 • Multi-task Super User Code for Inhibiting (Refuse Access), Overriding Door Lock (Keep Door Open); and Operating The Outputs at Any Time under Lock-up Condition for Safety • Duress Code for Door Opening and at The Same Time Reporting Event of Duress • 50 Visitor Codes for Temporary Workers and Visitors, Which Expire after Use or The Programmable Time of 1-99 Hours • Three Programming Options for System Safety Lock-up after Successive False Code Entry • Auto or Manual User Code Entry Mode for User Convenience And Security Enhancement • Pacifier Tone And Door Open Announcer Can Be OFF for Silent Environment • Standby Flashing LED Indicator Can Be OFF for People Do Not Like Flashing LED at Night • Six Egress Delay and Warning Options for User Convenience and Security Enhancement • Alarm Signal & Key Button Active Signal Outputs for Triggering Optional Equipments For Server Keypads with EM Card Reader And/Or Wiegand Data Output • User Code, EM Card and EM card + User Code Concurrent Operations • Compatible with 125 Khz Manchester 64-bit EM4100 & EM4200 EM Cards and Keyfobs • 26-bit, 34-bit or 37-bit Wiegand Data Output Format Selectable For DA-2800 Only – Wireless Remote Control • 24-bit Self-learning Codes (over 1 million) Receiver for RF Remote Keys • Accepts Up To 40 Maximum RF Remote Control Keyfobs or Wireless Keypads • Compatible with DK-2310 Wireless Keypad • Remote Control Key Controls Output 1, 2, 3 & Actuates Door Chime SPECIFICATIONS • Operation Voltage: 12-24V DC, Auto Adjusting • Operating Current: 65mA (Quiescent); 100mA (Three Output Relay Active) • Operation Environment: a) -20 Deg C to +70 Deg C b) 5-95% Relative Humidity, Non-condensing c) Indoor Installation Only (The Decoder Unit) • Input Sensing Terminals: a) Door Position (Normally Close) b) Egress Button (Normally Open) c) O/P 1 Inhibit (Normally Open) d) Door Bell (Normally Open) e) Tamper Switch (Normally Close) • Output Terminals For Triggering Optional Devices: a) Duress Output b) Alarm Output c) Key Active Output d) Inter-lock Output Output Terminals Are NPN Transistor Open Collector; 24VDC/100mA Sink Max. Rating • Housing Dimensions: 32.5(H) X 120(W) X 87(D) mm (ABS Plastic Box) • Weight: 250g Net For DA-2800 Only -- Wireless Remote Control • Receiver Type: Super-heterodyne Receiver for 24-bit Self-learning Codes (over 1 million Combinations) • Operation Frequency: 433Mhz • Number of Remote Control Channels: 4-Channel Control Output 1, 2, 3 and Door Chime • Number of Remote Control Devices: 40 Remote Control Keyfobs (DA-12) or Optional Wireless Keypad (DK-2310) • Control Distance: 40-60 Meters in Open Space Depending on Transmitting Device • Operation Voltage (DA-12 Keyfob): 12V Alkaline Battery, Type 27A (not included) • Dimensions (DA-12 Keyfob): 55(H) X 38(W) X 12(D)mm • Weight (DA-12 Keyfob): 32g Specifications are subject to change for modification without notice
|