INTRODUCTION DK-2832 is a self-contained three output, vandal resistant and weatherproof keypad. It has been designed for full feature stand alone access control applications. It is expandable to work with an optional decoder (DA-2800 or DA-2801) for high security split-decoded operation. It is also compatible with the auxiliary card reader (AR-2802) and the auxiliary keypad readers (AR-2806, AR-2807 and AR-2809) for upgrading a stand alone or split-decoded system to multi-station operation. The keypad is ideally for door strike and alarm arm-disarm controls. It is also a programmable industrial timer (from 1 second to over 24 hours) for automatic operator system. DK-2832A – Output Relay 1 & 2 Controlled by User Codes DK-2832B – Output Relay 1 Controlled by User Codes; Output 2 by Bell Button Output 3 is an open collector output controlled by user codes in both models. FEATURES Three Output Full Feature Digital Keypad for Door Lock and Equipment Controls 12-24V DC Auto Adjusted Wide Operation Voltage Range Built-in Real-Time-Clock Controls The Start and Stop Times in Daily Operation Stand-alone, Split-decoded and Multi-station Tri-Tech Operations Compatible with The Auxiliary Reader, Auxiliary Keypad and Split-decoder for System Expansion Simply with Single Wire Connection of Their Common Data I/O Bus Accepts 125 Khz EM Card Operation Via Optional Auxiliary Card Reader 26-bit, 34-bit or 37-bit Wiegand Data Output Format Selectable Compatible with Fail-safe or Fail-secure Electric Door Lock 5A / 24VDC Contact Rating Form C Relay for Output 1, 1A/24V DC Form C Relay for Output 2 and Open Collector for Output 3 Built-in Control Logic Circuit for High Security Dual Door Inter-lock System Timing Re-lock or Auto Re-lock for The Door After Entry Prevents “Tail-gate” Follower Door Forced Open Warning and Door Propped-up Warning Maximum 1,000 Users for Controlling Output 1 and 100 Users Each for Outputs 2 and 3 Multi-task Super User Code for Inhibiting (Refuse Access), Overriding Door Lock (Keep Door Open); and Operating The Outputs at Any Time and under Any Condition for Safety Duress Code for Door Opening and at The Same Time Reporting The Event of Duress 50 Visitor Codes for Temporary Workers and Visitors, Which Expire after Use or The Programmable Time of 1-99 Hours Three Programming Options for System Safety Lock-up after Successive False Code Entry Outputs Are Configurable with 1-99999 Seconds Auto Reset Mode or Start / Stop Mode. Auto or Manual User Code Entry Mode for User Convenience And Security Enhancement Pacifier Tone And Door Open Announcer Can Be OFF for Silent Environment Standby Flashing LED Indicator Can Be OFF for People Do Not Like Flashing LED at Night Six Egress Delay and Warning Options for User Convenience and Security Enhancement Alarm Signal Output for Triggering Optional Equipment Built-in Tamper Switch with N.C. Dry Contact Standard and Door Bell Button (Using Output 2 as Bell Actuation Contact) Versions Available Vandal Resistant Weatherproof Keypad with Back-lit Metal Key Buttons Die-Cast Metal Faceplate Supplied with Flush Mount Plastic Back Box
SPECIFICATIONS Operating Voltage: 12V-24V DC, Auto adjusting Operating Current: 60mA (quiescent) to 150mA Operation Temperature: -20 C to +70 C Environmental Humidity: 5-95% relative humidity non-condensing Working Environment & Ingress Protection: All weather, IP-66 Number of Users: Output 1 – 1,000 (Codes) + 50 Duress Codes Output 2 – 100 (Codes) + 10 Duress Codes (DK-2832A only) Output 3 – 100 (Codes) + 10 Duress Codes Number of Visitor Codes: 50, programmable for one time or with time limit Timings for Code Entry: 10 seconds waiting for next digit entry The Timers: Three 1-99,999 Seconds (Over 24 Hours possible) Independent Programmable Timers for O/P 1, 2 & 3 Egress Button: Programmable for Instant, Delay with Warning and/or Alarm Momentary or Holding Contact for Exit Delay Input Sensing Terminals: a) Door position, b) Egress, c) O/P 1 inhibit Output Control Terminals: Transistor Open Collector 24VDC/100mA sink Max for the following outputs a) Duress, b) Alarm, c) Output 3, d) Inter-lock Output Contact Ratings: Output Relay 1 – N.C. & N.O. dry contacts, 5A/24VDC Max. Output Relay 2 – N.C. & N.O. dry contacts, 1A/24VDC Max. Output 3 – open collector, 24VDC/100mA sink Max. Tamper Switch – N.C. dry contact, 50mA/24VDC Max. Dimensions: 120(H) X 80(W) X 50(D)mm Weight: 460g net Housing: Zinc alloy die-casting faceplate with sealed plastic back box
Specifications are subject to change for modification without notice.
|